3D Printer ABS PLA Filament Production Line
-
3D printer filament extrusion line consists of single screw extruder, immersion bath type water tank, haul-off, cutting machine etc, its control system consists of intelligent temperature control table, imported electrical components and converter. Main features of this line: stable extrusion, good plasticizing effect, high degree of control precision, convenient operation etc.
-
§ Output: 11/15/20/40 ± 10%Kg/h, expected producing speed: 0–100 m/min;
§ Environment: Indoor, humidity 0.85, no condensation point, temperature≤40℃;
§ Power supply: 380V 50HZ, 3-phase 4wires; Install power ≤40KW;
§ Circulation water flow: 3-5.0m3/h;
§ Compressed air: 0.6-0.7Mpa.
§ Operation direction of production line is from right to left direction;
§ Core height of production line is 1000mm;
§ Install space: 12.0m x 2.5m x 3.0m (length x width x height);
§ Color of machine: RAL 7035; Or according to client appoint color. -
-
Main screw diameterФ30/Ф40/Ф45/Ф50
-
Line Speed0-100m/min
-
Product output10/15/20/40 (kg/hr)
-
Dia. of filament1.75/3.0mm
-
Installation power40KW
-